8 Record
Note
•
To record, use only "Normal" (IEC type I) tapes on
which the write-protect notches (tabs) are not broken.
•
When you play or record a tape, the sound source
cannot be changed.
Auto record from CD to
tape
1
Select the disc source.
2
Load a disc.
3
Pull at OPEN on the front panel to
open the tape button cover.
4
Press
to open the tape door.
5
Load the tape with the open side
downward and the full spool to the left.
6
Press
to start recording.
Disc play starts automatically from the
»
beginning of the disc.
•
To pause recording, press
resume recording, press this button
again.
•
To stop recording, press
Record a section of a disc to tape
1
During disc play, press and hold
search, then release the button.
•
To select a track, press
2
Press
to pause disc play.
3
Load a tape.
4
Press to start recording.
Disc play resumes automatically.
»
•
To pause recording, press
resume, press this button again.
•
To stop recording, press
18
EN
. To
.
/
to
/ .
. To
.
Record from radio to tape
1
Tune to the desired radio station. (see
'Tune to a radio station' on page 17 )
2
Pull at OPEN on the front panel to
open the tape button cover.
3
Press
to open the tape door.
4
Load a tape.
5
Press
to start recording.
•
To pause recording, press
resume, press this button again.
•
To stop recording, press
Tip
•
The best recording level is set automatically. Change of
volume and sound effect does not affect recording.
•
The quality of recorded sound can differ depending on
the source and the tape used.
. To
.