Table of Contents
Advertisement
When sleep timer is deactivated,
»
disappears on the display.
Set the alarm timer
This unit can be used as an alarm clock. The last
selected source is activated to play at a preset
time.
1
Ensure that you have set the clock
correctly.
2
Press and hold TIMER on the remote
control for more than 2 seconds.
The hour digits are displayed and begin
»
to blink.
3
Press /
to set the hour.
4
Press TIMER to confirm.
The minute digits are displayed and
»
begin to blink.
5
Press /
to set the minute.
6
Press TIMER to confirm.
»
The timer is set and activated.
To select a source to activate as the alarm
sound:
1
Press DISC, TUN, USB, AUX/MP3 LINK,
or TAPE/AUX to select a source.
•
For DISC: ensure that there is a disc
in the disc compartment.
•
For TUNER: tune to a radio station.
•
For USB: connect a USB device.
•
For AUX/MP3 LINK: ensure that the
external device is connected and
turned on.
•
For TAPE: ensure that there is a tape
in the tape deck and press the
button.
2
Press
to switch the unit to standby.
20
EN
Activate and deactivate alarm timer
1
Press TIMER repeatedly to activate or
deactivate timer.
If timer is activated, the display shows
»
.
If timer is deactivated,
»
the display.
Listen through headphone
1
Plug a headphone into the
the unit.
disappears on
socket on
Advertisement
Table of Contents
