10 Other features
Set the alarm timer
This music system can be used as an alarm
clock. You can select disc, radio or USB as alarm
source.
Note
•
If you have set a record timer and an alarm timer, only
the latest timer shall be activated.
1
Ensure that you have set the clock
correctly.
2
Press
to switch to standby mode.
3
Press and hold SLEEP/TIMER for more
than 2 seconds.
» A prompt to select the source is
displayed.
4
Press CD, or TUNER or USB to select a
source.
5
Press SLEEP/TIMER to confirm.
» The clock digits are displayed and
begin to blink.
6
Press
/
to set the hour.
7
Press SLEEP/TIMER to confirm.
8
Repeat step 6 to 7 to set the minute.
» The timer is set and activated.
To deactivate or re-activate an alarm timer
1
In standby mode, press SLEEP/TIMER
repeatedly.
» If the timer is activated,
» If the timer is deactivated,
20
EN
is displayed.
disappears.
Tip
•
Bluetooth and MP3 LINK/PC IN mode cannot be
selected as the source of the alarm timer.
•
If disc or USB source is selected but no audio file can
be played, radio is activated automatically.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period of
time (in minutes).
» When sleep timer is activated,
displayed.
To deactivate sleep timer
1
Press SLEEP/TIMER repeatedly until [OFF]
(off) is displayed.
» When sleep timer is deactivated,
disappears on the display.
Karaoke
You can connect a microphone and sing along
with a music source.
1
Turn MIC VOL to the minimum level.
2
Connect a microphone to the microphone
port on the unit.
3
Press CD, or TUNER, or USB, or PC
IN/AUDIO IN to select the source, and
start play.
4
Sing through the microphone.
• To adjust the volume of the source,
press VOL +/-.
• To adjust the volume of the
microphone, turn MIC VOL.
is