Topic 6: Transferring Data To / From The Gps Using Easygps - Garmin etrex 10 Manual

Topic 6: Transferring data to / from the GPS using EasyGPS

EasyGPS is a free software available at
create, edit, and transfer waypoints, routes and tracks between your computer and your Garmin GPS
Once on this website, select the 'download free' button and download and install the software as
prompted.
Once installed and run for the first time, you will be prompted to insert in the units of measurements that
will be used in the EasyGPS software. This will allow for the software to recognise the recorded data being
transferred off the GPS. The following dot points will demonstrate what measurement units are to be
placed in these fields:

Distance is to be set to Meters.

Elevation is to be set to Meters.

Area is to be set to Square Meters.

Depth is to be set to Meters.

Speed is to be set to km/hr.

Bearing is to be set to ddd mm.mm (Azimuth).

Temperature is to be set to Celsius.

All the remaining default settings can stay the same.
When prompted to select the Garmin etrex® 10 GPS receiver, select 'Add GPS ' and choose from the list
'Garmin etrex 10'. These following figures will help you identify how to select the Garmin etrex® 10 GPS.
Using your Garmin etrex® 10 GPS
http://www.easygps.com/download.asp that also allows you to
Page 21