Settings > Ship Id - NSR Marine NGT-200 User Manual

7.2 SETTINGS > SHIP ID
SHIP ID: this option allows set up additional parameter on start of operation with
Tester – SHIP ID. With help of this parameter one can collect all saved results of
all equipment on a vessel (i.e. VHF radio station with DSC, MF/HF radio station,
several portable VHF radio stations, NAVTEX receiver etc.) in one group. This will
make the report creating procedure easier. Please turn your attention that managing
the results on the computer with software for NGT-200 one may find and group all
test results of all equipment on the vessel using vessel's MMSI number.
BUT! As portable VHF radio stations and NAVTEX receiver don't have MMSI
number the test results of these devices cannot be grouped by MMSI code. Thus,
Ship ID is the only marker that will allow group test results of all the equipment on
the vessel. True to say Ship ID is a measurement group label making usage more
convenient.
== Select SHIP
Current SHIP: 37
New SHIP
Keep current - F1
Set other
No SHIP
Show on start--> D
Current SHIP: 37 (example) – current
ship number; the ship number is NOT
==
incremented automatically!
New SHIP - Ent – press Enter to add
- Ent
new ship with the sequent ship number;
Keep current
- F2
- Esc
the current ship number, when you continue
inspecting the same vessel;
Set other
ship number (not current number and not the
sequent number); one can set any number, for
example if you need to check more
equipment on the vessel you've inspected
before;
No SHIP
the option "SHIP number";
Show on start--> D(Disable) or
E(Enable); this option allows to show or
hide this menu on the start before entering
main menu.
– F1 – press F1 to keep
- F2 – press F2 to set other
- Esc – press Esc to not use
55 NGT-200 UM.E 20210520-02
NGT-200 USER MANUAL