Table of Contents
Advertisement
7
SETTINGS
This menu item allows adjusting general tester settings.
All settings are stored in nonvolatile memory and will remain after tester is turned
off.
==== SETTINGS ====
Edit MMSI
SHIP ID
Test config
LCD contrast
Setup date/time
Clear profiles
General info
U-battery
Self test
7.1
SETTINGS > EDIT MMSI
You can check the current MMSI number of device under test and of the Tester in
this menu. You can either accept the current number or enter a new MMSI, if
required. Press ◄, ►, ▼ and ▲ to move the cursor and - , + keys to change
the value. Or simply use numeric keys to input the MMSI number. The data will be
saved automatically by exiting the menu.
=== Edit MMSI ===
To: 413999333
From: 413999997
F2 – Clear 'To'
This
menu
contains
submenus:
– editing MMSI to/from;
Edit MMSI
– add ship ID marker;
SHIP ID
Test config:
select the measurement
configuration;
– LCD contrast adjustment;
LCD contrast
Setup date/time
setup;
– clear profiles menu;
Clear profiles
– firmware / hardware and
General info
activated function revision;
– internal Li-Ion battery
U-battery
voltage;
Self test – self test of NGT-200 tester.
To : 413999333 – MMSI number of
DUT;
From: 413999997 –MMSI number of
NGT-200 tester.
Press F2 to clear MMSI number of DUT.
54
NGT-200 USER MANUAL
the
following
– date/time, date format
NGT-200 UM.E 20210520-02
Advertisement
Table of Contents
