Troubleshooting - Instant VORTEX PLUS User Manual

Dual air fryer 7.6l
Hide thumbs Also See for VORTEX PLUS:
Table of Contents

Advertisement

TROUBLESHOOTING

Problem
Cause
Air fryer will
The appliance is not
not turn on
properly plugged in.
Outlet is not powered.
The basket is not fully
inserted into the
air fryer.
Black smoke
Using an oil with a
is coming
low smoke point.
from the
air fryer
Food residue on the
heating coil, in the
cooking chamber or
on the accessories.
Appliance
malfunction.
White smoke
Cooking foods with a
is coming
high fat content, such
from the
as bacon, sausage,
air fryer
and hamburgers.
Water is vaporising,
producing thick steam.
Seasoning on food has
blown into element.
Solution
Make sure the power cord is plugged
into the outlet firmly.
Plug another appliance into the same
outlet to test the circuit.
Make sure the basket is fully inserted.
Cancel the Smart Programme, unplug
the cooker and allow it to cool to
room temperature.
Choose a neutral oil with a high smoke
point.
Cancel the Smart Programme, unplug
the cooker and allow it to cool to
room temperature.
Remove all accessories from the cooking
chamber and clean the cooking chamber
and all accessories thoroughly.
Contact Customer Care.
Avoid air frying foods with a high fat
content. Check the cooking chamber
for excess oil and/or fat and carefully
remove as needed before air frying.
Pat dry moist food ingredients before
air frying.
Do not add water or other liquid to the
cooking chamber when air frying.
Be mindful when seasoning food.
Spray vegetables and meats with
oil before seasoning to help the
seasoning stick.
24
User Manual

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VORTEX PLUS and is the answer not in the manual?

Questions and answers

SusanThrower
February 26, 2025

How to change the lightbulb?

1 comments:
Mr. Anderson
May 14, 2025

To change the lightbulb in the Instant Pot Vortex Plus:

1. Remove the cover by gently popping off the panel. Be careful not to break the clips.
2. Disconnect the small ribbon cable attached to the panel. It uses a simple Molex connector.
3. Unscrew the internal light housing. There are about eight Phillips screws (use a #2 Phillips screwdriver).
4. Once opened, locate the lightbulb and replace it. It is a simple $5 part.

Reassemble by reversing the steps.

This answer is automatically generated

Linda
May 10, 2025

I keep getting error code 205C but unable to determine what it is.

Table of Contents

Save PDF