Instant VORTEX PLUS User Manual page 24
Dual air fryer 7.6l
Hide thumbs
Also See for VORTEX PLUS:
- Quick start manual ,
- User manual (32 pages) ,
- Get started (24 pages)
Table of Contents
Advertisement
5.
Press Start and continue following the instructions for Cooking.
The air fryer will calculate the cooking times and start cooking each basket
at the appropriate time so they finish together.
About SyncFinish
•
If you need to remove one of the baskets during cooking, cooking in
the other basket will pause to keep the two in sync.
Ending SyncFinish
You can end SyncFinish if you need to make changes to the cooking
programmes by pressing Cancel. After that, reselect a programme and
settings for each basket.
22
User Manual
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VORTEX PLUS and is the answer not in the manual?
Questions and answers
How to change the lightbulb?
To change the lightbulb in the Instant Pot Vortex Plus:
1. Remove the cover by gently popping off the panel. Be careful not to break the clips.
2. Disconnect the small ribbon cable attached to the panel. It uses a simple Molex connector.
3. Unscrew the internal light housing. There are about eight Phillips screws (use a #2 Phillips screwdriver).
4. Once opened, locate the lightbulb and replace it. It is a simple $5 part.
Reassemble by reversing the steps.
This answer is automatically generated
I keep getting error code 205C but unable to determine what it is.