Using Both Baskets - Instant VORTEX PLUS User Manual
Dual air fryer 7.6l
Hide thumbs
Also See for VORTEX PLUS:
- Quick start manual ,
- User manual (32 pages) ,
- Get started (24 pages)
Table of Contents
Advertisement
USING BOTH BASKETS
The Vortex
Plus Dual Air Fryer lets you cook in both baskets at the
™
same time, with 3 options:
Cook in both baskets
Cook in both baskets at the same time, using different programmes
and settings.
SyncCook
Cook in both baskets at the same time, using the same programme and
settings for both.
SyncFinish
Cook in both baskets at the same time, using different programmes and
settings for each, but finish cooking at the same time.
How to cook in both baskets
1.
Follow the instructions for Cooking on page 14 and any specific
instructions for the smart programme you want to use.
2.
Set up your first programme in the left basket (select 1), including
any changes to time and temperature settings if you want.
3.
Press 2 to start setting up a second smart programme in the right
basket including any changes to time and temperature settings if you
want.
4.
Then press Start and continue following the instructions for Cooking.
You can also start the first programme in the right basket (select 2) and then set
up the left basket (select 1).
How to SyncCook
1.
Follow the instructions for Cooking on page 14 and any specific
instructions for the smart programme you want to use.
2.
After you've set up your first programme (in either basket) but
before pressing Start, press SyncCook.
The SyncCook icon displays.
3.
Then press Start and continue following the instructions for Cooking.
20
User Manual
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VORTEX PLUS and is the answer not in the manual?
Questions and answers
How to change the lightbulb?
To change the lightbulb in the Instant Pot Vortex Plus:
1. Remove the cover by gently popping off the panel. Be careful not to break the clips.
2. Disconnect the small ribbon cable attached to the panel. It uses a simple Molex connector.
3. Unscrew the internal light housing. There are about eight Phillips screws (use a #2 Phillips screwdriver).
4. Once opened, locate the lightbulb and replace it. It is a simple $5 part.
Reassemble by reversing the steps.
This answer is automatically generated
I keep getting error code 205C but unable to determine what it is.