Instant VORTEX PLUS User Manual page 23
Dual air fryer 7.6l
Hide thumbs
Also See for VORTEX PLUS:
- Quick start manual ,
- User manual (32 pages) ,
- Get started (24 pages)
Table of Contents
Advertisement
About SyncCook
•
You can change the cooking time and temperature settings for
both baskets (SyncCook will remain ON) by adjusting the cooking
time or temperature.
•
You can change the cooking time and temperature settings for
either basket (SyncCook will turn OFF) by pressing 1 or 2 to
select a basket to change and then adjusting the cooking time
or temperature.
Ending SyncCook
You can end SyncCook at any time to make changes to one or both
cooking programmes.
1.
Press 1 or 2 to select the basket you'd like to make changes to.
SyncCook stops and the icon no longer displays.
2.
Adjust the cooking time or temperature settings and press the
Control Dial to confirm the changes.
3.
Press Start to continue cooking, with each basket cooking with
its own programme and settings.
How to SyncFinish
1.
Follow the instructions for Cooking on page 14 and any specific
instructions for the smart programme you want to use.
2.
Set up your first programme in either basket (select 1 or 2)
including any changes to time and temperature settings if you
want.
3.
Press 1 or 2 to select the other basket and start setting up a smart
programme in that basket, including any changes to time and
temperature settings if you want.
4.
Press SyncFinish.
The SyncFinish icon displays.
21
User Manual
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VORTEX PLUS and is the answer not in the manual?
Questions and answers
How to change the lightbulb?
To change the lightbulb in the Instant Pot Vortex Plus:
1. Remove the cover by gently popping off the panel. Be careful not to break the clips.
2. Disconnect the small ribbon cable attached to the panel. It uses a simple Molex connector.
3. Unscrew the internal light housing. There are about eight Phillips screws (use a #2 Phillips screwdriver).
4. Once opened, locate the lightbulb and replace it. It is a simple $5 part.
Reassemble by reversing the steps.
This answer is automatically generated
I keep getting error code 205C but unable to determine what it is.