Table Of Contents; Safety Information - HAMPTON BAY LILLYCREST II Use And Care Manual

Table of Contents

Table of Contents ................................................................ 2
Safety Information ............................................................... 2
Warranty ............................................................................... 3
Pre-Installation .................................................................... 3
Installation ............................................................................ 6

Safety Information

READ AND SAVE THESE INSTRUCTIONS
To reduce the risk of electric shock, ensure the electricity has been
1.
turned off at the circuit breaker or fuse box before you begin.
All wiring must be in accordance with the National Electrical Code
2.
ANSI/NFPA 70 and local electrical codes. Electrical installation
should be performed by a qualified licensed electrician.
The outlet box and support structure must be securely mounted and
3.
capable of reliably supporting 35 lbs. (15.9 kg). Use only UL Listed
outlet boxes marked "Acceptable for Fan Support of 35 lbs. (15.9 kg)
or less."
CAUTION: The fan must be mounted with a minimum of 7 ft. (2.1 m)
4.
clearance from the trailing edge of the blades to the floor.
Do not operate the reversing switch while the fan blades are in
5.
motion. You must turn the fan off and stop the blades before you
reverse the blade direction.
Do not place objects in the path of the blades.
6.
To avoid personal injury or damage to the fan and other items, use
7.
caution when working around or cleaning the fan.
Electrical diagrams are for reference only. Light kits that are not
8.
packed with the fan must be UL-listed and marked suitable for use
with the model fan you are installing. Switches must be UL General
Use Switches. Refer to the instructions packaged with the light kits
and switches for proper assembly.
After making electrical connections, spliced conductors should be
9.
turned upward and pushed carefully up into the outlet box. The
wires should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box.
10. All setscrews must be checked and retightened where
necessary before installation.
11. Suitable for use in wet locations when installed in a GFCI protected
branch circuit.
12. Use only with light kits marked "Suitable for use in wet locations."
Assembly .............................................................................. 7
Operation ........................................................................... 12
Care and Cleaning ............................................................. 13
Troubleshooting ................................................................. 13
WARNING: To reduce the risk of personal injury, do
not bend the blade brackets (also referred to as
flanges) during assembly or after installation. Do not
insert objects in the path of the blades.
WARNING: Remove the rubber motor stops on the
bottom of the fan before installing the blades or
testing the motor.
WARNING: To reduce the risk of fire or electric shock,
do not use this fan with any solid-state speed control
device.
WARNING: To avoid possible electrical shock, turn
the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.
WARNING: To reduce the risk of fire, electric shock,
or personal injury, mount to outlet box marked
"Acceptable for fan support of 35 lbs. (15.9 kg) or
less," and use the screws provided with the outlet
box.
2