Connecting A Camcorder To The Front Sockets; Option 1: Using Dv In Socket; Option 2: Using S-Video In Or Video In Socket - Philips HTS5700R/05 User Manual

Optional Connections
DV OUT
Connecting a camcorder to
the front sockets
You can use the front sockets to copy
camcorder recordings. These sockets are
located behind the flap on the right hand
side, it provides convenient connections
for a camcorder.

Option 1: Using DV IN socket

Use this connection if you have a Digital
Video or Digital 8 camcorder. The DV
socket conforms to the i.LINK standard.
It provides the best picture quality.

Use an i.LINK 4-pin cable (not supplied)
to connect DV IN socket on the DVD
recorder to the appropriate DV OUT
socket on the camcorder.
Before you start operating, press REC
SOURCE on the remote control
repeatedly to select 'DV' as the input
channel. For recording, see pages 31~33.
Helpful Hints:
– The DV IN socket does not support a
connection to a Personal Computer.
– It is not possible to record from the DVD
recorder to your camcorder via the DV IN
socket on your DVD recorder.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
18
1_dvdr3355_eu_eng_15891.indd 18
(continued)
A
OR
Option 2: Using S-VIDEO In or
VIDEO In socket
Use S-VIDEO connection if you have a
Hi8 or S-VHS(C) camcorder. It provides
better picture quality.
Alternatively, you can use VIDEO
connection if your camcorder has only a
single video output (Composite Video,
CVBS).
Connect the S-VIDEO or VIDEO
A
socket at the front panel of the DVD
recorder to the corresponding S-VHS or
Video output socket on the camcorder.
Use an audio cable (red/white ends) to
B
connect the AUDIO L/R sockets at the
front panel of the DVD recorder to the
audio output sockets on the camcorder.
Before you start operating, press REC
SOURCE on the remote control
repeatedly to select 'Front S-VIDEO' or
'Front CVBS' as the input channel,
depending on your connections.
For recording, see pages 31~33.
B
2005-04-27 2:35:55 PM