Sareer Berry 4'6 Bed Assembly Instruction

ASSEMBLY INSTRUCTION

Berry 4'6 Bed

BEFORE YOU START

1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.

2. Check and ensure that you have all required contents for complete assembly.

3. Always read the assembly instructions carefully before beginning assembly.

4. The packaging and contents can be a choking hazard, therefore keep out of reach of small chidren at all times.

5. Do not over tighten the bolts as this may damage the thread.

1-4

Table of Contents

Do you have a question about the Berry 4'6 Bed and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTION Berry 4'6 Bed Berry 4'6 Bed BEFORE YOU START 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product. 2. Check and ensure that you have all required contents for complete assembly.
Page 2 Approximate Assembly 2 person needed Time:20mins EXPLODED EXAMPLES FITTINGS M6x15mm bolt x 4pcs M6x20mm bolt x 8pcs M6x55mm bolt x 4pcs M4 Allen Key x 1pc Spanner x 1pc M6x60mm bolt x 4pcs M6 Hex Nut x 12pcs...
Page 3 Step 1 Attach the Siderails to both the headend and footend. Tap in the finials into bedend. Step 2 Attach the Centre rail to the bedend as shown. Followed by the support legs on centre rail.
Page 4 Step 3 Align the pins on the Plastic Holders to the holes along the Centre Rail and the Siderails. Gently tap them into the holes. Retightening of all fixing periodically is recommended. When moving your fully assembled bed you must first remove the mattress and lift the frame into position, take care when lifting and always have two people handling the bed.