Sareer Selina 3' Bed with Trundle Manual

mins

Approximate

Assembly Time

Two persons are

recommended to

assemble this product

Selina 3' Bed with Trundle

2270mm

BEFORE STARTING...

Read the assembly instructions carefully before

beginning assembly.

Check and ensure that you have all parts and fittings

for complete assembly.

Choose a clean, level, spacious assembly area.

Hard surfaces may damage the product.

The packaging and contents can be a choking

hazard, therefore keep out of reach of small chidren

at all times.

Do not over tighten the bolts as this may damage

the thread.

1120mm

Table of Contents

Do you have a question about the Selina 3' Bed with Trundle and is the answer not in the manual?

Page 1 Assembly Time Two persons are recommended to assemble this product 2270mm 1120mm Selina 3' Bed with Trundle BEFORE STARTING... Read the assembly instructions carefully before beginning assembly. Check and ensure that you have all parts and fittings for complete assembly.
Page 2 HARDWARE M8 x 15mm M8 x 25mm Washer M8 x 40mm x 12pcs x 8pcs x 12pcs x 4pcs Allen Key M8 x 60mm Spanner Hex Nut x 1pc x 2pcs x 1pc x 4pcs PART...
Page 3 Attach the siderails to the bedend. Followed by the across rail to the siderails. Align the pins on the holders to the holes along the siderails. Gently tap them into the holes using hand palm.
Page 4 Attach across rails to the trundle siderails. Align the pins on the holders to the holes along the trundle siderails. Gently tap them into the holes using hand palm.
Page 5 Use screws provided as trundle baffle (Optional step) Retightening of all fixing periodically is recommended. When moving your fully assembled bed you must first remove the mattress and lift the frame into position, take care when lifting and always have two people handling the bed.