Panasonic NV-GS80E NV-GS80EB Service Manual page 33

13. Installation of LCD Panel, Reflect Sheet, Lead Light
Panel, Diffusion Sheet, BEF Sheet, BEF Sheet A and
Panel Holder Unit
a. When replacing the LCD Panel, the Diffusion Sheet,
the BEF Sheet and the BEF Sheet A, make sure to
remove the Protection Sheets.
To distinguish Sheets from attached Protection
Sheet:
- A blue Protection Sheet is affixed to both faces of the
Diffusion Sheet.
- A green Protection Sheet is affixed to both faces of the
BEF Sheet.
- A green Protection Sheet is affixed to both faces of the
BEF Sheet A.
Protection Sheet
(blue)
Protection Sheet
(green)
Protection Sheet
(green)
b. Use extreme care when handling the LCD Panel, the
Reflect Sheet, the Lead Light Panel, the Diffusion
Sheet, the BEF Sheet and the BEF Sheet A to avoid
damage, dust, and spots (especially fingerprints, etc.)
Install in order shown below.
1) Install in order: the BEF Sheet A, BEF Sheet and
Diffusion Sheet while fitting the corners of each sheet
into the corners of the Panel Holder Unit.
2) Install the Lead Light Panel while fitting the corners into
the corners of the Panel Holder Unit.
3) Place the Reflect Sheet so it is aligned with Portion A
of the Panel Holder Unit, then install it using the
adhesive tape portions of the Reflect Sheet.
Adhesive
tape
Fig. D13-1
4) Install the LCD Panel with adhesive tape so it is aligned
with Portions B of the Panel Holder Unit.
Diffusion Sheet
BEF Sheet
BEF Sheet A
Do not touch
the surface of
Lead Light Panel.
Adhesive
tape
Reflect Sheet
Panel Holder Unit
Reflect Sheet
Lead Light Panel
Diffusion Sheet
BEF Sheet
BEF Sheet A
Panel Holder Unit
Portion A
Adhesive
tape
Portions B
LCD Panel
33
Adhesive
tape
(white)
(stripe)
(stripe)
Adhesive
tape
Fig. D13-2