Change Tv Preferences; Access Decoder Channel - Philips 22HFL3331D/10 User Manual

Update using OAD (On the Air
software Download)
If Professional mode is [On], your TV automatically
receives software updates in semi-standby mode
without notice on screen. The TV restarts after the
software update is complete.

Change TV preferences

1
Press MENU.
2
to select [Setup] >
Press
[Installation] > [Preferences].
3
Press OK or to enter [Preferences].
[Location]
• Optimises TV settings for
your location - home or shop.
Note
If [Shop] mode is selected:
•
[Smart picture] setting will be switched
The
to [Vivid] automatically to display the brightest
backlight on screen.
•
E-sticker is applicable to display the TV selling
features on screen.
• [Volume bar]
when adjusting the volume.
[Channel info.]
•
about the TV channel every time you
switch channels. Select [Full] to view
channel information or [Off] to turn off
the channel information.
[EasyLink]
• Enables one-touch play and
one-touch standby between EasyLink
compliant devices.
[E-sticker]
• For shop mode only. Sets the
location of the e-sticker.
Displays the volume bar
Displays information

Access decoder channel

You can map channels provided through a
decoder or descrambler to your TV channel
selection. In this way, you can select these
channels by using the RC of your TV. The
decoder or a descrambler must be connected
to EXT1 (SCART).
Set decoder channel
Map channels from a decoder or descrambler
1
Press MENU.
2
Press to select [Setup] >
[Installation] > [Preferences] >
[Decoder].
3
Press OK or to enter [Decoder] menu
.
4
Press to select [Channel] and press
OK or
to enter.
A list of analogue channels appears on
»
the screen.
5
Press to select one channel to map
to the decoder/descrambler channel and
press OK to confirm.
6
Select [Status] and press OK or
enter.
7
Press to select [EXT 1] (SCART)
the connector used by the decoder/
descrambler.
8
Press OK.
9
Press EXIT to exit.
to
EN
19