Audio Input; Netremote - auna iTuner CD 10032753 Manual

EN
72

AUDIO INPUT

You can play sound from an external device via the device.
1. Connect the external device to the Analog Audio Input on the device
through suitable RCA cable (not included).
2. Press MODE button on unit or remote control repeatedly to select Line
In mode.
3. Turn the VOLUME|q dial on the unit or press the VOL +/– buttons on
the remote control to adjust the volume control for your desired sound
output level. Set the desired volume on the radio and the external audio
device if necessary.
4. In Line In mode, operate your audio device directly for playback features.
When connecting the external audio device, refer to the owner's manual of
the external device.

NETREMOTE

The device gives a feature of NetRemote by smartphone or tablet in iOS or
Android system. By downloading the app named UNDOK, you can view all
the modes of Internet radio, Spotify, Music player, DAB and FM. And select
the mode on your smartphone or tablet.
Before using the UNDOK app, make sure the device and the smartphone or
tablet are in the same WiFi network. Launch the app. The app initializes and
scans for the device in the network. Tap the device to make the NetRemote
connection.
• Once the smartphone or tablet has already accessed the device, they
will automatically connect the next time when you open the app again.
• Be aware that if another smartphone or tablet with the app in the same
network has access with the device; the original connection will be cut
off.
• When it is the first time that you connect the device to Internet Radio,
the app may ask you to enter the PIN. Default PIN is "1234". For details
of changing the PIN for security, please refer to System Settings section:
Network - NetRemote PIN Setup.
• Select your desired mode in the main page. You may then control
the selected mode on your smartphone or tablet and on the device
simultaneously.