auna iTuner CD 10032753 Manual page 53

2. Turn the SCROLL|SELECT dial on the unit or press the
buttons on the remote control to select your choice.
3. Press the SCROLL|SELECT on the unit or SELECT button on the remote
control to confirm your selection.
Initial Set-Up
When you first connect the unit to the mains socket, the display will
show the welcome screen then with language menu shown up, turn
SCROLL|SELECT dial on unit or press
control to change the display language of your choice and press the
SCROLL|SELECT dial on unit or SELECT button on remote control to
confirm.
Then the privacy policy page will come up. Please visit the website
mentioned in the page for the details of the privacy policy. Press
SCROLL|SELECT dial on the unit or SELECT button on the remote control to
accept for next step.
1. To launch the initial Setup wizard, turn the SCROLL|SELECT dial on the
⏮ ⏭
unit or / buttons on the remote control to confirm.
2. In the next step you can select the time format. Select the desired setting
[12] or [24] and press the SCROLL|SELECT dial on the unit or SELCT
button on the remote control to move on to the next step.
3. Here it is possible to select which source (DAB/FM/Network/No update)
the unit uses to obtain and update the time and date. If "Update from
Network" selected, proceed to the next step to select time zone to
ensure that the time is displayed correctly. And then select the "Daylight
savings" is [ON] or [OFF].
4. In the next step you can specify whether the product should remain
connected to the Internet when on standby. Turn the SCROLL|SELECT
dial on the unit or press
then press the SCROLL|SELECT dial on the unit or press SELECT button
on on the remote to confirm.
5. Your radio will now scan for your wireless network, this may take a
few seconds then a list of all the wireless networks will appear on the
screen. Select the WLAN network you know and whether to use WPS
(Push Button/Pin) or Skip WPS to enter the password using the displayed
keyboard.
Connecting using the WPS button on your router
Connecting using the WPS (Wi-Fi Protected Setup) button on your router
is a quick and easy way to connect your radio without having to type in a
password. Select one of the following connection methods:
⏮ / ⏭
buttons on the remote to select [YES],
buttons on remote
EN
53