Table of Contents
Advertisement
■ The light beam dark,not inhomogeneou. 光束显得暗淡不均匀。
◎ when the light suore is to the usage life,the light suore is not enough,please change a new one for
the same description.
光源可能已经达到使用寿命,发光不足,更换同规格的光源.
◎ Please check the reflector parts is dirty.Keep them clear.
检查光学部分是否堆积有灰尘,清洗干净.
◎ Please measure if the power supply is enough.
测量电力是否供应不足；
◎ Enter the menu"service options"to choose "calibration"to enter the "Color" and"Gobo"
adjustment,the center can be modulated.
进入菜单"服务选项"选择"校准"进入颜色和图案调节，可调至中心.
■
shadow is fogging。 投射出来的影像模糊。
fixture
he
T
◎ Please check the data on the DMX 512 controller is suitable for the electric focus.
检查电子对焦系统对应的DMX512控制器通道数值是否合适现在的投射距离。
◎ Please check the machenical parts is jamging.After cleaning,please add some
temperature -durable juice.
检查调焦系统的机械部分是否卡住，去尘埃后添加防冻和耐温润滑油。
■
fixture couldn't
Part of the
灯具部分功能不能接受控制器指令：
◎Please check the order is correct to the moving .
检查控制设备是否发送了对这些功能的正确动作指令；
◎Please check the mechanicalpart is deformation or loose.
检查这些功能对应的机械部分，是否松动变形；
◎Please check the function to the motor soshet is loose or drive chip is burn down;
检查这些功能对应的电机插座是否有松动或相应驱动芯片已烧坏；
◎Please check the wire of the motor is cut at zig piont;
检查这些功能对应的电机电线在转弯处是否折断；
◎Please check these function to the motor is damaged.
检查这些功能对应的电机是否损坏。
responsled to the controlling order:
-28-
Advertisement
Table of Contents
