Philips HDRW 720/00-02 User Manual page 59

1 If the disc is write-protected or a finalised DVD+R disc, playback
starts automatically.
2 If playback does not start automatically, use the B or A button
to select the title you want to play on the index screen.
You can also use the DOWN or UP button on the front.
With N , O you can jump to the begin or the end of the
index screen.
3 Press the PLAY G button.
P
title/chapter number, elapsed time will appear on the display.
a
b
4 To stop playback, press STOP h on the remote control or
h on the DVD recorder.
5 To remove the disc, press OPEN/CLOSE J on the front of the
DVD recorder.
You can also use the DVD recorder to play audio CDs
If the TV is on, the audio CD screen appears automatically.
During playback, the current track number and its elapsed playing time
will show on the TV screen and on the recorder display.
1 Insert an audio CD.
P
Playback starts automatically.
2 Stop playback using STOP h .
P
The number of tracks and the total time are displayed.
MP3 (MPEG1 Audio Layer-3) files are highly compressed music files.
Using this technology the data volume can be compressed by a factor
of 10. This means it is possible to record 10 hours of music in CD
quality on a single CD-ROM.
File system: ISO9660
Directory structure: maximum of 8 levels
Formats: *.mp3
Filenames: maximum of 12 characters (8+3)
Maximum of 32 albums, 999 titles
Supported sampling frequencies: 32, 44.1, 48 (kHz). Music with
sampling frequencies other than these will be skipped.
Supported bit rates: 32, 64, 96, 128, 192, 256 (kbit/s)
ID3 Tag: Version 1, 1.1. In later versions the directory name is
displayed as the album and the filename as the title.
Only the first session of a multi-session CD will play back.
1 Insert an MP3 CD.
P
Playback starts automatically.
STOP h
2 Stop playback using STOP h .
P
The number of albums is displayed in the display.
Using N or O select the next or previous title.
You can also use the T/C button to select titles and albums.
- Press the T/C button and use the C or D button to select
the 'T' symbol for title or 'C' for chapter. Use the B or
A buttons or the number buttons 0..9 on the remote
control to select the number of the title/chapter.
You can also use the repeat functions ( SELECT button).