Philips HDRW 720/00-02 User Manual page 38

This screen can be divided in subcategories. These depend on the
information provided by the GUIDE Plus+
categories available, no data has been provided yet. Try visiting this
page later.
1 Press B .
Select the corresponding subcategory with B , A .
2 Select from the displayed data with B or A .
3 Confirm using OK to receive more information.
4 Return to the '
' screen by pressing the red function button
(' ').
Here you can allocate the programme numbers to the corresponding
TV channels and switch them on/off for the programme listings ('
screen). Moreover, you can define the use of the TV channels on the
external receiver.
1 Press B .
2 Select the TV channel you want to change using B , A .
Use the D and C buttons to switch between tiles.
This tile contains the TV channels with their short descriptions and
indicates whether the TV channel is displayed in the programme listing
(' ' screen) or not.
You can switch on/off a TV channel for the '
the red function buttonn
This tile contains the TV channel properties and the programme
numbers. You can modify channel allocation or assign an external
receiver. In order to assign a receiver, it must be already installed in
the GUIDE Plus+ ® system.
To change allocations, proceed as follows:
® system. If there are no
B
D C
' screen using
1 Select the TV channel you want to change using B , A .
2 Press the green function button.
3 Enter the programme number of the TV channel using the number
buttons 0..9 . You can only enter programme numbers of TV
channels that have already been installed.
B A
Please observe that in the case of modified TV channels, the transfer of
GUIDE Plus+ ® channel data may take up to 24 hours.
'
Here you can make or change the basic settings such as language,
country, external receiver. Moreover, you can watch an automatic
demonstration of the GUIDE Plus+
All the settings you have already made are displayed here. Select the
desired line using B or A and confirm with OK . For more
information on the settings, read section 'Setting up the GUIDE Plus+
system' in chapter 'The GUIDE Plus+
Here you can view a demonstration of the different functions of the
GUIDE Plus+ ® system.
Start the automatic presentation with OK .
If you start the demonstration, programmed recordings can be deleted.
If you cancel the presentation by pressing OK , you will go directly to
the setup menu.
® system.
® system'.
®