Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bresser 9625800
Summary of Contents for Bresser 9625800
- Page 1 6X24 OLED LASER RANGEFINDER Art. No.: 9625800 Instruction manual...
- Page 2 Fig. 1 MODE Fig. 2 RF / SP / SE 888.8 M 0000.0 0000.0...
-
Page 3: Safety Instructions
1. SAFETY INSTRUCTIONS CLASS 1 LASER PRODUCT This device is classified as a CLASS 1 LASER PRODUCT according to EN/IEC 60825-1-2014. The accessible laser radiation is safe under reasonably foreseeable conditions, and under normal conditions of use. Do not open the housing. The device does not contain any parts that can be serviced by the user. -
Page 4: Ec Declaration Of Conformity
2. EC DECLARATION OF CONFORMITY A "Declaration of conformity" in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/9625800/CE/9625800_CE.pdf... -
Page 5: Oled Display
5. OLED DISPLAY (Fig. 2) Upper display area: 8. Mode Display: 9. Target / Crosshair Lower display area: 10. Unit of measurement (M= meter) 11. Distance / Speed 12. Laser indicator 6. START-UP 1. Open the battery compartment (Fig. 1, 6). 2. -
Page 6: Operating Mode
Note: This device stores the last set brightness level and automatically resets it after it is turned off and on again. 9. OPERATING MODE Fig. 4. RF mode (distance measurement). Fig. 5. SP mode (speed measurement). This device can be used either as a distance meter or as a speedometer. 1. -
Page 7: Speed Measurement
10.2 MOVING DISTANCE MEASUREMENT (SCAN) 1. Switch on the device and switch to "RF" mode (Fig. 4). 2. Press and hold the POWER button (Fig. 1, 2) for approx. 3 seconds to switch to "Scan" mode. The laser indicator (Fig. 2, 12) flashes permanently. 3. -
Page 8: Troubleshooting
13. TROUBLESHOOTING “0000.0" is shown in the Measurement not Observe requirements for display successful - measurement successful measurement accuracy is influenced by and repeat measurement type and surface property of the target object, angle of the laser beam as well as weather conditions No display Empty battery... - Page 9 ELECTRONICS/BATTERIES Do not dispose of electronic devices in the household garbage! The adjacent symbol of a crossed-out dustbin means that the device is subject to Directive 2012/19/EU. Old devices must not be disposed of in normal household waste. In accordance with Directive 2012/19/EU, the device must be disposed of in an orderly manner at the end of its service life.
-
Page 10: Warranty
16. WARRANTY The regular warranty period is 5 years and begins on the date of purchase. For complete warranty terms and services, please visit www.bresser.de/warranty_terms. 17. SERVICE In case of warranty/damage, please always contact our customer service first (preferably by e-mail). Here our competent employees are at your disposal. In many cases, small problems can already be solved in this way. - Page 12 Bresser GmbH Gutenbergstr. 2 46414 Rhede · Germany www.bresser.de @BresserEurope Errors and technical changes reserved. Manual_9625800_Rangefinder-Speedmeter-6x24_en_BRESSER_v052022a...
Need help?
Do you have a question about the 9625800 and is the answer not in the manual?
Questions and answers