Philips Norelco 8040X User Manual page 13

ENGLISH
24
5 You can store the razor in the charging
stand.
6
Put Protective Razor Head Cap on razor
to protect heads.
Note: If lotion build-up has occurred, remove
Razor Head Assembly and soak for a few minutes
under hot water or a degreasing liquid (e.g.
alcohol). Be sure to thoroughly rinse Razor Head
Assembly under tap water before using razor.
Razor Head Assembly: Once A Month
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn razor OFF.
C
1
2 Remove Razor Head Assembly from razor
by pulling Razor Head Assembly straight
up from razor.
C
0
3 Using your thumb and forefinger turn the
razor head clockwise and lift the comb off
of Razor Head Assembly.
4 Remove and clean one set of cutters and
combs at a time.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
5
6
6
C
7
Be sure to replace the comb back into the
original razor head before cleaning the next set.
C
8
9
6
C
10
The Razor Head Assembly will only fit correctly
in one position on razor. Make sure to align the
2 shaving lotion dispensing holes on the Razor
Head Assembly with the 2 shaving lotion tubes on
the razor.
ENGLISH
Separate the cutter from the comb and
clean with a small brush or rinse clean
under hot water.
Replace the cutter back onto the Razor
Head Assembly making sure the blades are
pointing upwards.
Place the razor head comb back onto the
Razor Head Assembly.
Turn the razor head counterclockwise
until it locks into place.
Repeat the process for the other two sets
of cutters and combs.
Replace Razor Head Assembly back on
razor and push down (you will hear a
click).
25