Caring For Your Iron After Use; Storing Your Iron; Maintaining Your Iron - Oster GCSTCW-317-013 Instruction Manual

TIP: When using vertical steam, hang clothing on a hanger for best results. Hanging
curtains and drapes may also be steamed.
TO USE:
1. Hold iron vertically near, but not touching the fabric you want to steam. Pull the fabric
tight.
2. Press Shot of Steam
WARNING: To prevent burns, keep hands away from the area being steamed.
WARNING: DO NOT steam garments while wearing them; this may result in injuries.
When the iron is plugged in and turned on, a 30-minute timer will start once the unit has
been plugged in.
To reset the Iron:
Press reset button. This will restart the timer for the auto-off feature.
WARNING: timed auto-off is a safety feature, not a recommended means for turning off
your iron. See the "Storing Your Iron" section for information on turning off your iron and
storing it safely between uses.
TURNING OFF IRON: Turn Steam Lever to
WARNING: NEVER yank power cord when unplugging iron. This can damage the cord.
Empty water tank completely after each use.
1. Turn off iron and allow to cool.
2. Empty water reservoir after each use for a longer iron life.
3. Loosely loop the power cord around the Cord Wrap and Handle and store the iron on
its heel rest.
CAUTION: Wrapping the cord around the iron too tightly can damage the cord.
Using Self-Clean Feature: Use the Self-Clean feature once a month to maintain optimal
iron performance.
1. Turn off iron.
2. Move Steam Lever back and forth to remove debris and minerals from Steam Valve.
This keeps water flowing into the steam chamber.
3. Fill water reservoir with tap water to MAX line.
4. Plug in iron, set Fabric Select Setting to Linen and heat for 2 minutes.
GCSTCW-317_GCSTCB-200_19ESM2 (LA).indd 4
button in 3-second intervals as you move iron over wrinkles.
®
Timed Auto-Off Feature

Caring for Your Iron After Use

Storing Your Iron

Maintaining Your Iron

English - 4
(Dry) and Fabric Select Dial to Off. Unplug.
9/11/19 08:52