Specifying Image Size - Casio Exilim EX-Z750 User Manual

BASIC IMAGE RECORDING
NOTE
• The "2 sec" self-timer setting is best when shooting
with a slow shutter speed, because it helps to avoid
blurring of images due to hand movement.
• The following functions are not available for use in
combination with the self-timer.
Normal continuous shutter mode, Short Movie mode,
Past Movie mode
• The following functions are not available for use in
combination with the Triple Self-timer.
Business Shot, ID Photo, Movie mode, Short Movie
mode, Past Movie mode, MOVIE BEST SHOT mode

Specifying Image Size

"Image size" is the size of the image, expressed as the
number of vertical and horizontal pixels. A "pixel" is one of
the many tiny dots that make up the image. More pixels
provide finer detail when an image is printed, but a higher
pixel count also causes the image's file size to be larger.
You can select an image size to suit your needs for greater
detail or smaller file size.
• Note that this setting is valid for snapshots only. For
information about movie image size, see page 104.
1.
In a REC mode, press [MENU].
2.
Use [ ] and [ ] to select the "Quality" tab.
3.
Use [ ] and [ ] to select "Size", and then
press [ ].
4.
Use [ ] and [ ] to select the setting you
want, and then press [SET].
• When selecting the image size, the image size value
(pixels) will alternate on the display with a
corresponding print size. The print size indicates the
optimum paper size when you print an image that is
the image size you select.
71