Specifying Iso Sensitivity - Casio Exilim EX-Z750 User Manual

OTHER RECORDING FUNCTIONS

Specifying ISO Sensitivity

You can change the ISO sensitivity setting for better
images in places where lighting is dim or when you are
using faster shutter speeds.
• ISO sensitivity is expressed in terms of values that
originally indicated the sensitivity to light for photographic
film. A larger value indicates higher sensitivity, which is
better for recording when available lighting is dim.
1.
In a REC mode, press [MENU].
2.
Select the "Quality" tab, select "ISO", and
then press [ ].
3.
Use [ ] and [ ] to select the setting you want
and then press [SET].
To get this:
Automatic sensitivity selection
Lower sensitivity
Higher sensitivity
Select this setting:
Auto
ISO 50
ISO 100
ISO 200
ISO 400
125
IMPORTANT!
• Under certain conditions, a high shutter speed in
combination with a high ISO sensitivity setting can
cause digital noise (graininess), which makes an
image appear rough. For clean, good-quality images,
use the lowest ISO sensitivity setting possible.
• Using a high ISO sensitivity setting along with the
flash to shoot a nearby subject may result in
improper illumination of the subject.
• "Auto" ISO sensitivity always is used in the following
cases, regardless of the current ISO sensitivity
setting.
Movie mode, Short Movie mode, Past Movie mode,
MOVIE BEST SHOT mode
NOTE
• You can use the key customization feature (page
120) to configure the camera so the ISO sensitivity
setting changes whenever you press [ ] and [ ]
while in a REC mode.