Bottom Surface - VersaTables FB Series Assembly Instructions Manual

Assembly
Step 11
Attach the Bottom Surface to
the Moving Beams using (4)
50mm Furniture Bolts as
shown.
Then, use (4) 1/4-20 x 1/2"
Truss Head Screws to fasten
the Bottom Surface onto the
Front Panel as shown.
x4
50mm
Furniture Bolt Truss Head Screw
Step 12
Insert (2) 1.75" x 1.75" End Caps
at the top of the Leg Uprights
as shown.
20con gure%20the%20Zebra%20GK420D%20printer%20for,your%20Royal%20Mail%202D%20barcode%20labels%20in%20 %20the%20Zebra%20GK420D%20printer%20for,your%20Royal%20Mail%202D%20barcode%20labels%20in%20Zenstores. https://www.zenstores.com/help/how-con gure-zebra-gk420d-printer-printing-royal-mails-2d-barcode-labels/#:~:text=Ho https://www.zenstores.com/help/how-con gure-zebra-gk420d-printer-printing-royal-mails-2d-barcode-labels/#
14105 Avalon Boulevard, Los Angeles, CA 90061 | Tel 800-465-1660 x1 | Fax 310-353-7109

Bottom Surface

Front Panel
x4
1/4-20 x 1/2
End Caps
https://www.zenstores.com/help/how-con gure-zebra-gk420d-printer-print
www.Versatables.com
48" model - Truss Head Screw x3
Bottom Surface
Moving Beam
x2
1.75 x 1.75
End Cap