IOGear GCS1412TAA4C Manual page 23

Security Target
Requirement Class
FIA: Identification and
Authentication
FMT: Security Management
FPT: Protection of the TSF
FDP_PDC_EXT.2/KM – Authorized Devices (Keyboard/Mouse)
FDP_PDC_EXT.2/VI – Peripheral Device Connection (Video Output)
FDP_PDC_EXT.2/UA – Authorized Devices (User Authentication Devices)
FDP_PDC_EXT.3/KM – Authorized Connection Protocols (Keyboard/Mouse)
FDP_PDC_EXT.4 – Supported Authentication Device
FDP_PUD_EXT.1 – Powering Unauthorized Devices
FDP_PWR_EXT.1 Powered By Computer
FDP_RIP.1/KM – Residual Information Protection (Keyboard Data)
FDP_RIP_EXT.1 – Residual Information Protection
FDP_RIP_EXT.2 – Purge of Residual Information
FDP_SWI_EXT.1 – PSD Switching
FDP_SWI_EXT.2 – PSD Switching Methods
FDP_SWI_EXT.3 – Tied Switching
FDP_TER_EXT.1 Session Termination
FDP_TER_EXT.2 Session Termination or Removed Devices
FDP_TER_EXT.3 Session Termination upon Switching
FDP_UAI_EXT.1 User Authentication Isolation
FDP_UDF_EXT.1/AO – Unidirectional Data Flow (Audio Output)
FDP_UDF_EXT.1/KM – Unidirectional Data Flow (Keyboard/Mouse)
FDP_UDF_EXT.1/VI – Unidirectional Data Flow (Video Output)
FIA_UAU.2 – User Authentication Before Any Action
FIA_UID.2 – User Identification Before Any Action
FMT_MOF.1 – Management of Security Functions Behavior
FMT_SMF.1 – Specification of Management Functions
FMT_SMR.1 – Security Roles
FPT_FLS_EXT.1 – Failure with Preservation of Secure State
18
Requirement Component
Version 1.1
2022-03-08