Table of Contents
Advertisement
Security Target
•
2/4/8 port USB DisplayPort single and dual display for DisplayPort (6 devices)
•
2/4 port USB HDMI single and dual display for HDMI (4 devices)
•
2/4/8 port USB DVI single and dual display for DVI (6 devices).
The Secure KVM Switch products allow for the connection of a mouse, keyboard, user authentication
device (such as smart card or CAC reader), speaker, and one or two video displays (depending on specific
device type) to the Secure KVM Switch, which is then connected to 2, up to 4, or up to 8 separate
computers (again depending on specific device type). The user can then switch the connected peripherals
between any of the connected computers using a push button on the front of the device or on the RPS.
The selected device is always identifiable by a bright orange LED associated with the applicable selection
button.
To interface with connected computers, the Secure KVM Switch products support analog audio output
and USB connections for the keyboard, mouse, and user authentication device. Depending on model, they
support DisplayPort, DVI-I, or HDMI for the computer video display interface. The switched peripherals on
the console side are analog audio output, USB keyboard and mouse, USB user authentication device, and
DisplayPort, HDMI or DVI-I video output (depending on model).
Separate USB cables are used to connect the keyboard/mouse combination and the user authentication
device to the connected computers. The Secure KVM Switch products supporting DisplayPort convert the
DisplayPort video signal to HDMI. The HDMI signal inside the KVM will be converted again to DisplayPort
signal for output to the connected video display(s) and the AUX channel is monitored and converted to
EDID. The Secure KVM Switch products also support audio output connections from the computers to a
connected audio output device. Only speaker connections are supported and the use of an analog
microphone or line-in audio device is prohibited. The tables below identify the interfaces of the Secure
KVM console and computer ports according to model number.
Model No.
DisplayPort HDMI
GCS1412TAA4C
GCS1422TAA4C
GCS1312TAA4C
GCS1322TAA4C
GCS1212TAA4C
GCS1222TAA4C
GCS1414TAA4C
GCS1424TAA4C
GCS1314TAA4C
Table 4: IOGEAR Secure KVM Switch Console Interfaces and TOE Models
Console Video Output
Interface
DVI-I
•
•
•
•
•
•
•
•
•
Console
Console
Keyboard
Mouse
USB 1.1/2.0
USB 1.1/2.0
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
7
Version 1.1
2022-03-08
Console Audio
Console CAC
output
Reader
3.5mm Analog
USB
Audio output
1.1/2.0
(Speaker)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Advertisement
Table of Contents
