[Eng] [Input+Relay 254R304] 7. Resetting Settings To Default Values - NetPing 254R304 User Manual

[ENG] NetPing Input+Relay 254R304, User Guide -[ENG] [Input+Relay 254R304] 7. Resetting Settings to Default Values
[ENG] [Input+Relay 254R304] 7. Resetting Settings to Default
Values
To reset parameters you have to do following steps:
• switch off the power;
• press and hold down RESET button
• switch on the power;
• wait for 10 seconds (the CPU indicator will blink);
• release the RESET button.
If you do follow the steps successfully, the LED will blink, indicating the reset of the parameters.
By default, the device has the following parameters:
Username: visor
Password: ping
IP-address: 192.168.0.100
The musl of the subnetwork: 255.255.255.0
Gate: не установлен
SNMPcommunity: SWITCH
MAC-address: 00 a2 xx xx xx xx
Here xx xx xx xx corresponds to the serial number of the device. Thus, all devices after production have unique
MAC addresses.
After resetting the parameters to the default values, it is necessary to carry out the initial configuration of the
device.
(use a pen/stylus/pencil

[ENG] [Input+Relay 254R304] 7. Resetting Settings to Default Values

etc.);
–