Home Tab - Tech Controllers EU-M-9t User Manual

2. HOME TAB

Home tab displays the main screen with tiles illustrating the current status of particular heating system devices. Tap on the
tile to adjust the operation parameters
NOTE
„No communication" message means that the communication with the temperature sensor in a given zone has been
interrupted. The most common cause is the flat battery which needs replacing.
Tap on the tile corresponding to a given zone to edit its pre-set temperature:
The upper value is the current zone temperature whereas the bottom value is the pre-set temperature.
The pre-set zone temperature depends by default on the weekly schedule settings. Constant temperature mode enables the
user to set a separate pre-set temperature value which will apply in the zone regardless of the time.
:
13
Screenshot presenting an example tab with main menu parameters
Screenshot presenting an example setting change