Table of Contents
Advertisement
Step 2.
Open to the web interface of the monitoring device / IP PDU to start the configuration. The sensor settings in the
device's web interface are specified in the firmware description, the section "Working with Channels of Discrete
Input-Output" for the corresponding model here: http://docs.netpingdevice.com/.
Sensor Connection Diagrams
The sensor output is a dry contact. The connection order of the N-NC or N-NO wires is not important.
NetPing 2/PWR-220 v3/ETH, NetPing 2 IP PDU ETH 53R14, NetPing 2 IP PDU GSM3G
203R15
•
NetPing 2/PWR-220 v3/ETH —
•
NetPing 2 IP PDU ETH 53R14 —
[ENG] NetPing Supply Voltage Sensor 995S2, User guide -[ENG] [995S2] Installation and Connection
http://www.netpingdevice.com/products/netping-2-pwr-220-v3-eth
http://www.netpingdevice.com/products/netping-2-ip-pdu-eth-53r14
[ENG] [995S2] Installation and Connection
–
Advertisement
Table of Contents
