Presence Event Output - Infineon XENSIV BGT60TR13C User Manual

XENSIV™ 60GHz BGT60TR13C Radar System on Module MCU4
Presence Detection

Presence event output

5 Presence event output
When event control is turned on, the presence detection result would be shown under the "Event" tab.
Item Description
Presence event Presence detection result.
In: Moving object detected in the zone.
Out: No moving object detected in the zone.
Distance (m) Detected distance range of the closest moving object, in meters.
Time (s) Relative event time, in seconds. The time starts from power on; it is not
an absolute time.
The received event command would be shown in the command text box for reference. When calibration mode
is enabled, a calibrate message box would also be shown.
Figure 8 Presence detect event page
11 of 20
2022-05-16