Table of Contents
Advertisement
Follow these steps for Digitarium Zeta Portables sold in (or after) 2015:
1. Remove the fisheye lens from the box.
2. Loosen the four thumb screws on the lens
brace clamps.
3. Remove the bright red dust cap which
covers the lens mount opening. Make sure
to remove any tape which may have been
used to secure the cap.
4. Remove the small lens cap from the back
end of the lens.
5. Fit the small end of the fisheye lens into
the lens mount opening, lining the silver
plunger on the lens with the small red dot
on the plastic lens mount cover (as shown
to the right).
6. Gently push the lens downward into the
lens opening.
7. Grab the top outer rim of the lens and
rotate the entire lens clockwise to lock it
into place. You will feel a click as the
plunger finds its slot (as shown to the
right).
8. You will need to adjust the focus after you
have turned the projector on. See the
section "Focusing the Lens" on page 7.
Digitarium® Zeta Portable User Manual
10
Advertisement
Table of Contents
