Do you have a question about the OV6100 and is the answer not in the manual?
Questions and answers
Toni-Lee Brown
April 14, 2025
How do I get the door back on
1 comments:
Mr. Anderson
April 14, 2025
To reattach the door on a Cardini OV6100 oven, follow these steps:
1. Hold the door at a 15° angle to the oven. 2. Align the door hinges with the slots on the oven body. 3. Insert the hinges into the slots fully. 4. Open the door completely to its maximum angle. 5. Push the hinge buckles forward to lock the hinges in place.
Ensure the door moves smoothly and is securely attached.
Page 1
60cm BUILT-IN ELECTRIC OVEN INSTRUCTION MANUAL Read this manual carefully before operation Note: Pictures in this manual are for reference only. OV6100 60cm electric oven...
Acknowledgement We hope you enjoy using the many features and benefits this oven provides. Before using this product please study this instruction manual carefully. Keep this manual in a safe place for future reference. Ensure that other people using the product are familiar with these instructions. Warnings •...
• If the supply cable is damaged, it must be replaced by an electrician in order to avoid a hazard. • Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass as they can scratch the surface, which may result in the glass shattering. •...
DECLARATION OF COMPLIANCE When you have unpacked the oven, make sure that it has not been damaged in any way. If you have any doubts at all, do not use it and contact a professionally qualified technician. Keep packing materials such as plastic bags, polystyrene, or nails out of the reach of children because these are dangerous to children.
Operating Instructions When the oven is first connected to the electrical supply, wait for the display to automatically show "12.30", a beep will sound once and the "." will flash. Ensure the correct time of the day is set before using the oven. Please note that it is 24 hour clock.
Page 8
Audible warning time adjustment: This function can be used to receive an audible warning at the completion of the adjusted time period. 1> Press " " button to select the minute minder function. The relevant " " " ." symbol will flash. 2>...
Page 9
Full automatic programming: This function is used to commence cooking after a certain period of time and with a set duration. The oven is adjusted to the desired cooking function. The oven temperature is adjusted to the desired temperature depending on the food being cooked. First: Press "...
Accessories Wire rack: For grill, dishes, cake pan with items for roasting and grilling. Slide bracket : These support the wire rack and pan. Universal pan: For cooking large quantities of food such as moist cakes, pastries, frozen food etc or for collecting fat/spillage and meat juices.
Page 11
SHELF PLACEMENT WARNING: To ensure the oven shelves operate safely, correct placement of the shelves between the side rails is imperative. Shelves and pan only can be installed between the first and fifth layers. The shelves must be installed in the right direction. This will ensure that during careful removal of the shelf or tray, hot food items should not slide out.
VENTILATION OPENINGS When cooking is finished, if the temperature of the ventilation openings is over 70°C, the cooling fan will continue working. The cooling fan will stop working once the temperature drops lower than 60°C. Ventilation openings CONNECTION OF THE OVEN N - neutral connection green / yellow earthwire is essential...
Removing the Oven Door Removable door allows full access to the entire interior of the oven for easier and quicker maintenance. To remove the door, open the door to the maximum angle. Then pull the buckle at the door hinge backward. (Figure 1) Figure 1 Close the door to an angle of approximately 15°.
Cleaning & Maintenance In order to maintain good appearance and reliability, we recommend you regularly clean your oven. The modern design of the oven facilitates minimal maintenance. The parts of the oven which come into contact with food need to be cleaned regularly. Before any maintenance and cleaning, isolate the power.
Warranty & Service For warranty information, please visit the Cardini website: www.cardini.com.au For any service issues, please email our customer care team: service@cardini.com.au Rev A PN:16171100A29021...
Need help?
Do you have a question about the OV6100 and is the answer not in the manual?
Questions and answers
How do I get the door back on
To reattach the door on a Cardini OV6100 oven, follow these steps:
1. Hold the door at a 15° angle to the oven.
2. Align the door hinges with the slots on the oven body.
3. Insert the hinges into the slots fully.
4. Open the door completely to its maximum angle.
5. Push the hinge buckles forward to lock the hinges in place.
Ensure the door moves smoothly and is securely attached.
This answer is automatically generated