Base Installation - Joie i-Prodigi Instruction Manual

Base Installation

see images -
1 10
1. Attach the ISOFIX guides to the vehicle's ISOFIX anchor points (see
vehicle owner's manual).
surface of the vehicle seat from being torn. They can also guide the
ISOFIX connectors.
2. Unfold the load leg from storage compartment.
3. Extend the ISOFIX connectors by pressing the ISOFIX adjustment
button while pulling on the connector.
4. Press the ISOFIX adjustment button to adjust the ISOFIX
connectors. Line up the ISOFIX connectors with the ISOFIX guides,
and then click both ISOFIX connectors into the ISOFIX anchor
points.
4
!
Make sure that both ISOFIX connectors are securely attached to
the vehicle's ISOFIX anchor points. There should be two audible
clicks and the colors of the indicators on both ISOFIX connectors
should be completely green.
!
Check to make sure the base is securely installed by pulling on both
ISOFIX connectors.
5. Pull the rebound bar towards the back of the vehicle and lock into
place by pulling the rebound bar adjustment webbing.
6. After placing the base on the vehicle seat, extend the load leg to floor
. When the load leg is installed correctly, the load leg indicator will
6
turn green. It will turn red when installed incorrectly.
!
The load leg has multiple positions. When the load leg indicator turns
red this means the load leg is in the wrong position.
!
Make sure the load leg is in full contact with the vehicle floor pan.
!
Squeeze the load leg adjustment button, then shorten the load leg
upwards. -1
6
5
The ISOFIX guides can protect the
1
2
3
-1
4
5
-2
6
7. The completely assembled base is shown as
!
The ISOFIX connectors must be attached and locked onto the
ISOFIX anchor points. -1
7
!
The load leg must be installed correctly with green indicator.
Removing the Base
8. To remove the base from the vehicle seat, push the secondary lock
buttons -1 first and then press the ISOFIX releasing buttons
9
on the ISOFIX connectors before removing the base from the vehicle
seat. 9
9. Before transporting the seat, press ISOFIX adjustment button and
move the ISOFIX connectors back into the storage position.
.
7
-2
7
-2
9
10
6