Other Features; Set The Alarm Timer - Philips DC220/93 User Manual

6 Other features

Set the alarm timer

You can set two alarms which go off at different
time.
1
Ensure that you have set the clock
correctly.
2
Press and hold AL 1 or AL 2 for 2
seconds.
» [AL 1] or [AL 2] begin to blink.
3
Press SOURCE repeatedly to select an
alarm sound source: iPod/iPhone, iPod/
iPhone playlist, FM tuner, or buzzer.
4
Press AL 1 or AL 2.
» Hour digits begin to blink.
5
Press TUNING +/- or
to set the hour.
6
Press AL 1 or AL 2 to confirm.
Minute digits begin to blink.
»
7
Repeat steps 5-6 to set the minute.
8
Repeat steps 5-6 to select whether to
ring alarm the whole week, on weekdays,
or at weekend.
9
Repeat steps 5-6 to set the alarm volume.
Tip
•
If you want to wake up to specific music
track(s) on iPhone/iPod, after set iPhone/iPod
playlist as the wake up source on the unit,
you need to create a playlist called 'PHILIPS'
via iTunes and copy the track(s) to this new
'PHILIPS' playlist.
•
If no playlist is created or there is no song
in the playlist, the unit will play the music
track according to the last music playback
preference on iPhone/iPod.
/ repeatedly
Activate and deactivate the alarm
timer
1
Press AL 1 or AL 2 repeatedly to activate
or deactivate the timer.
If the timer is activated, [
»
[ AL2] is displayed.
If the timer is deactivated,
»
[AL1] or [AL2] disappears.
Gentle wake
Gentle wake function peacefully wakes you
with gently ascending alarm volume.
• If selected the alarm source iPhone/iPod,
iPhone/iPod playlist or FM, alarm volume
will gentle increase.
• If selected the alarm source Buzzer, the
alarm will increases beep tone frequency
within seconds.
Repeat alarm
1
When the alarm rings, press
BRIGHTNESS/REP ALM.
The alarm repeats ringing minutes later.
»
Tip
•
You can press /
repeat alarm.
Stop alarm ring
1
When the alarm rings, press the
corresponding AL 1 or AL 2.
The alarm stops but the alarm settings
»
remain.
View the alarm settings
1
Press AL 1 or AL 2.
AL 1] or
before
to adjust the interval to
EN
13