Getting Started - Levoit LV-H135-RWH User Manual

G E T T I N G S TA R T E D
Pull the handle of the filter cover to
1.
open the housing. Remove the filter
from the housing.
Figure 1.1
Take the filter out of its plastic
2.
packaging, then reinstall it into the
housing. Make sure the pull tabs on the
filter are facing out.
Note: If you are not planning to use the air purifier for a long period of time, we recommend keeping the
filter clean by leaving it inside its plastic packaging until it is ready to be used.
01.01_UML_LV-H135_ConsoleTrueHEPAAirPurifier.indd 7 01.01_UML_LV-H135_ConsoleTrueHEPAAirPurifier.indd 7
[Figure 1.1]
[Figure 1.2]
pull tabs
facing out
Figure 1.2
Replace the filter cover by lining up the
3.
cover's feet with the matching slots on
the bottom of the housing.
Figure 1.3
Push the cover securely closed.
4.
1.4] The air purifier uses a
[Figure
magnetic safety trigger to make sure
that the filter cover is closed. If not
properly closed, the air purifier will not
turn on.
Figure 1.4
[Figure 1.3]
7
2/7/20 11:28 AM 2/7/20 11:28 AM