Table of Contents
Advertisement
Available languages
Available languages
USE & OPERATION
CONTROL PANEL
Model without Ionizer
Model with Ionizer *^
FUNCTION BUTTONS
POWER
Press the
button to turn the unit on. The cooler will start automatically at medium speed. After
a few seconds the speed will switch to low. To turn the unit off, press the button again.
SWING
Press the
button until the
indicator light is illuminated on the
control panel. The louvers will begin to move left to right automatically.
Vertical Air Flow - You can manually adjust the louvers to change vertical
airflow.
Louver
Movement
TIMER
Press the
button until the desired time duration setting is selected. When the set time
has passed, the unit will automatically turn off (unit remains in Standby mode until power cord
is unplugged from electrical socket). The
function allows you to program the unit for up to
7 hours of use.
SPEED
Press the
button repeatedly to change the speed between 3 (High) - 2 (Medium) - 1 (Low).
* Applicable for models with this feature only.
^ Ionizer reduces particles in the air. This is not an air purifier.
EN
2
Advertisement
Table of Contents
