Cooler Location; Filling With Water - Honeywell CL202PEUI User Manual

USE & OPERATION (CONTINUED)

COOLER LOCATION

Make sure to position the air cooler correctly before you set up and start using the product. Please
refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide.

FILLING WITH WATER

CAUTION:
Unplug the unit from the electrical power outlet before emptying or
refilling the water tank.
Open the Water Fill Door & Ice Compartment Lid, which is located
on the top of the unit. The Water Level Indicator is located at the
front of the unit. Refill the water tank when water level is low. Do not
fill water above the "Max." water level mark to avoid water droplets
collecting on the louvers. Check the water level in the tank before
running the COOL function. Make sure that the water in the tank
is above the minimum water level mark. Running the unit in COOL
mode with inadequate water may cause pump failure.
Note: The water capacity refers to the total volume of water that can
be contained within the air cooler water tank and water distribution
system. The water capacity in the tank at the "Max." indicator level
Water Fill Door & Ice
may be lower than the actual water capacity of the air cooler.
Compartment Lid
WARNING: Do not fill water tank with dirty water or salt water. This
can damage the unit and Honeycomb media.
EN 5