Casio Exilim EX-Z400 User Manual page 72

. To change Auto Shutter trigger sensitivity (Sensitivity)
1.
Use [8] and [2] to select "Sensitivity" and then press [6].
2.
Use [4] and [6] to select the sensitivity setting you want, and then
press [SET].
• You can select any one of three sensitivity levels, from ø (Lowest) to
œ (Highest).
• With the œ (Highest) setting, the auto shutter release is triggered relatively
easily. Auto shutter release triggering becomes more difficult with the ø
(Lowest) setting, but recorded images have the least blur. Experiment with
Auto Shutter trigger sensitivity settings to find the one that work best for you.
. Using Auto Shutter in Combination with Continuous Shutter
The following describes how Auto Shutter works while used in combination with
Continuous Shutter (page 39).
With CS: Normal
Speed CS, CS: 4 fps,
and CS: 10 fps
With CS: Flash
The camera will go back into Auto Shutter standby and be
ready to shoot again each time it is triggered. To stop an
ongoing Continuous Shutter operation, press [SET].
3 continuous shutter images will be shot with flash when
Auto Shutter is triggered.
72
Advanced Settings