Table Of Contents; Declaration Of Compliance; Proper Use; General Safety Rules - Metabo W 21-180 Instructions For Use Manual
Hide thumbs
Also See for W 21-180:
- Catalog (14 pages) ,
- Instructions for use manual (116 pages) ,
- Instructions manual (136 pages)
Table of Contents
Advertisement
02_ENG_Asien_9780_0205
Instruction for use
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new Metabo power tool.
Every Metabo power tool is carefully tested and is subjected to the strict quality controls of the Metabo
Quality Assurance section. However, the service life of any power tool is to a great degree dependent on
yourself as the user. Please read and understand the information contained in these Operating
Instructions and the accompanying documents. The more care you exercise in handling your Metabo
power tool, the longer will be the reliable service it provides for you.
Contents
9.1
9.2
9.3
discs
1
Declaration of Compliance
On our own responsibility, we hereby declare that
this product complies with the standards or
standard-setting documents listed on page 2.
2
Proper Use
Equipped with the appropriate accessories,
Metabo angle grinders are suitable for cutting,
grinding, sanding with a backing pad and brushing
metal, concrete, stone and similar materials in dry
operating conditions.
18.12.2007
14:14 Uhr
Saw discs, saw chains or similar parts must not be
used under any circumstances.
The operator bears sole responsibility for any
damage caused by inappropriate use.
The generally recognised accident prevention
regulations and the accompanying Safety
Instructions must be observed.
3
SAVE THESE INSTRUCTIONS.
Keep all of the documents supplied with the tool in
a safe place and pass them on to the new owner if
you part with the tool.
4
Always use proper guard with grinding wheel.
A guard protects operator from broken wheel
fragments.
Accessories must be rated for at least the
speed recommended on the tool warning label.
Wheels and other accessories running over rated
speed can fly apart and cause injury. Use at least
"max. 80 m/s".
Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
Always wear eye goggles and hearing protection.
Use other available protective equipment such as
protective gloves, suitable protective work clothing
and helmet.
Seite 5
General Safety Rules
Read and understand all instructions.
Failure to follow all instructions listed
below and in the red booklet may result
in electric shock, fire and/or serious
personal injury.
Specific Safety Rules
Pay particular attention to the
parts of the text marked with this
symbol for your own safety and
the protection of your power tool.
5
Hide quick links:
Advertisement
Table of Contents
