Advertisement
11. Hold [a] Main Unit and connect the Vacuum Hose into the Duct with [ f ] Joint.
[a]
Duct
[ f ]
12. Adjust the position of Guide Ring at Front Roller with that of Blade.
1. Release the Thumb Screw and adjust the
CUTTING
position of Base to the required cut depth.
2. The Scale shows the approximate cut depth
when the Base Line is aligned with the Guide Mark.
Base
Thumb Screw
DO NOT lift or move backward the angle grinder as it leads to the scattering of the Dust.
Head Office in Japan
NAKAYA CO.,LTD.
1313-92 Yanagisawa, Sanjo, Niigata, Japan
-4-
Vacuum Hose
Front Roller
Guide Ring
Blade
Scale
Base Line
Guide Mark
Cut Depth
Do NOT hold the grinder when
connecting the Vacuum Hose.
13. Attach the Handle into M8 / M10 port.
3. Securely hold the angle grinder and handle.
4. Turn on the switch of the vacuum and angle grinder.
5. Place the Front Roller on material, then slowly forward the
angle grinder.
Handle
M8 port
M10 port
Cutting
Direction
Front Roller
Blade rotation
20th-Apr. 2022
Eto Naoya
Managing Director
Advertisement
