Add Satellites To Your Network Using The Router Web Interface.23 - NETGEAR Orbi Pro WiFi 6 AX6000 User Manual

Orbi Pro WiFi 6 AX6000 Router Model SXR80 and Orbi Pro WiFi 6 AX6000 Satellite Model SXS80
The satellite bar LED pulses white, then lights one of the following colors for about
three minutes, and then turns off:
• Blue. The router and satellite successfully synced, and the connection between
the router and satellite is good.
• Amber. The router and satellite successfully synced, and the connection between
the router and satellite is fair. Consider moving the satellite closer to the router.
• Magenta. The router and satellite failed to sync. Move the satellite closer to the
router and try again.
Note: The first time that you sync the satellite and the router, the sync process can
take up to five minutes because the router might automatically update the satellite's
firmware.
Add satellites to your network using the router web interface
You can use the Orbi Pro WiFi 6 router web interface to add a satellite to your Orbi
network.
To add a satellite to your Orbi network using the router web interface:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see What to do if you get a browser security warning on
page 33.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you set the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Add Orbi Pro Satellite.
The Place Your Satellite page displays.
5. Follow the instructions about where to place your satellite at your location.
6. Connect the satellite to a power source.
7. Click the NEXT button.
8. Wait about two minutes for the satellite's bar LED to light solid white.
Overview and Setup 23 User Manual