NETGEAR Orbi Pro WiFi 6 AX6000 User Manual page 158

Orbi Pro WiFi 6 AX6000 Router Model SXR80 and Orbi Pro WiFi 6 AX6000 Satellite Model SXS80
The Wired Devices table displays the following information:
• Status: Displays only if a MAC ACL (see MAC access control lists on page 57) or
network access control (see Network access control list on page 62) is enabled.
The field displays if a device is allowed or blocked. (For satellites, N/A is shown.)
• Device Name: The device model, name, type, and IP address.
• IP Address: The device IP address. The device's IP address can change because
the router assigns an IP address to each device when it joins the network.
• MAC Address: The device MAC address. The unique MAC address for each
device does not change.
• Connection Type: The device is connected to the Orbi network through a wired
Ethernet connection.
• Connected Orbi: The Orbi router or satellite that the device is connected to. The
Orbi router's or satellite's MAC address also displays.
The Wireless Devices table displays the following information:
• Status: Displays only if a MAC ACL (see MAC access control lists on page 57) or
network access control (see Network access control list on page 62) is enabled.
The field displays if a device is allowed or blocked. (For satellites, N/A is shown.)
• Device Name: The device model, name, type, and IP address.
• IP Address: The device IP address. The device's IP address can change because
the router assigns an IP address to each device when it joins the network.
• MAC Address: The device MAC address. The unique MAC address for each
device does not change.
• Channel: The channel on which the device is connected to the WiFi network.
• SSID: The radio band of the WiFi network to which the device is connected.
• Connected Orbi: The Orbi router or satellite that the device is connected to. The
Orbi router's or satellite's MAC address also displays.
• TX/RX Rate (Mbps): The average rate in Mbps at which the device transmits (TX)
and receives (RX) traffic.
• Association Time: The period in hours, minutes, and seconds that the device is
connected to the WiFi network.
• Link Status: The quality and strength in dBm of the WiFi connection of the device.
3. To update the page with the most recent information, click the Refresh button.
Manage and Monitor Your Orbi
Pro System
158 User Manual