Trane ReliaTel Installation Manual page 20

Menu Definitions
Erase all?
Are you sure?
UC17 config
Temp. sensor
Occupancy src
(a)The parameter is only displayed when the zone sensor is connected to a ReliaTel or Symbio 800 control system.
20
Resets the sensor back to factory settings.
Confirms the erase reset.
Defines the sensor connected to electrical terminals 17 and 18.
• None – terminal not in use.
• Motion – motion sensor or external dry contact.
• Temp – 10K temperature sensor.
Defines the location of the space temperature sensor used for control.
• Internal – sensor internal to the zone sensor.
• Remote – sensor wired to the HVAC equipment.
• Wired – sensor wired to zone sensor terminals 17 and 18.
Defines the source of the occupancy signal.
• Schedule – zone sensor time schedule.
• Motion – motion sensor or external dry contact wired to zone sensor.
BAS-SVN028K-EN