HP OMEN 27u Maintenance And Service Manual page 14

2) Disassemble VESA screws:
A: Remove this hole with a plastic disassembly rod; Remove VESA cover.
B: Use a Phillips screwdriver to remove the above 6PCS screws, Separate the stand hinge from the display
head.
C: Use a Phillips screwdriver to remove the above 6 pcs screws.
3) Disassemble pack Cover& Shielding BKT:
A: Use a plastic disassembly rod; insert the heat dissipation hole on the side of the small back cover, pry
the small back cover and remove it
B: Use a Phillips screwdriver to remove the above 3pcs screws, Remove the metal parts of the top cover.
10
Disassemble Stand
Disassemble VESA screws