Download Print this page

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP 27mx Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
I/F Board*1, SPS board*1, Control Board*1, LENs
Board
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps Panel*1
0
C605 in SPS Board
HDMI cable*1, Power cord*1
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
4
0
0
1
0
0
1
2
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP 27mx

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3 1. Use tool to release screws on monitor, then separate the Stand from monitor head 2. Use tool to release screws on monitor, then use tool to separate rear cover from monitor head through tear down slot. EL-MF877-00 Page 3 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 4 3. Disassemble the lamp wire, LVDS FFC*2 and ctrl-BD FFC from connector, separate Assy- chassis from monitor head by hand 4.Disassemble the lamp wire from panel, and disassemble ctrl-BD and LED BD from MF by hand. EL-MF877-00 Page 4 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 5 5. Use tool to release screws*8 on MF, then separate the MF from panel. 6. Use tool to release screws*7 on the power board and interface board, then disassemble power-BD and interface-BD from the chassis by hand. EL-MF877-00 Page 5 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 6 7. Disassemble the LVDS*1 by hand. 8. Separate foot rubbers by hands or tools. EL-MF877-00 Page 6 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 7 9. Release the screws from the base bracket, then disassemble the base plastic cover, swivel ring , and base bracket. 10. Use tool to release screws and separate VESA from column. 11. Use tool to separate vesa cover and vesa bracket. EL-MF877-00 Page 7 Template Revision B...
  • Page 8 12. Use tool to release screws and separate pivot cover. 13. Use tool to release screws and separate tilt cover. EL-MF877-00 Page 8 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 9 14. Use tool to separate column front cover and engine cover. 15. Use tool to release screws and separate column rear cover. EL-MF877-00 Page 9 Template Revision B PSG instructions for this template are available at EL-MF877-01...