Gigaset COMFORT 552 Manual page 11

Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls and to
enable the alarm to be used.
Press the display key Time
or, if the date and time have already been set:
Settings
The active input position flashes.
Change input position:
To switch between the entry fields:
Enter date:
enter the month, day and year in 8-digit format.
Enter time:
enter hours and minutes in 4-digit format.
Save settings:
Press the display key Save. . . . Saved is shown in the display and
a confirmation tone sounds.
Return to idle status:
Press and hold the End call key
The telephone is now ready for use.
Connecting the headset
Use the 3.5 mm jack to connect the headset to the left-hand side of
the handset .
1
The headset volume corresponds to the setting for the receiver
volume.
Do not charge the handset in charging unit or base
station while the headset is connected.
OK Date/Time OK
Handset
Calls Time
Date/Time
Date:
08/15/2022
Time:
00:00
Back Save
1
11