Table of Contents
Congratulations ...................................................................3
Remote Control ....................................................................7
First Use ..............................................................................10
Operation Tips .....................................................................19
Troubleshooting ...................................................................20
2
Important Reminder
Keep the remote control where its signal can reach the
receiver of the indoor unit.
When operate the air conditioner, make sure the remote
control is pointing to the signal receiver of the indoor
unit.
When the remote control sends out a signal, the symbol
will blink for about 1 second on the display of the
remote control.
The indoor unit will acknowledge the signal with a beep
when it receives the signal from the remote control.
Please press the button of the remote control and
resend the signal if you did not hear a beep from the
indoor unit.